91 programmes in maintenance and engineering, available as public courses, online delivery or in-house training for your own team.
Showing 91 of 91 courses
Good planning is what separates a maintenance department that controls its workload from one that lives in permanent reaction. The full...
Repeat failures are expensive, and most of them are preventable once the real cause is understood. This programme introduces reliability...
A shutdown that overruns costs production, credibility and budget, usually in that order. Scope control, work list freezing, contractor...
Ageing plant, tight capital and rising operating costs force hard decisions about what to repair, what to replace and what to run to...
Isolation goes wrong when the paperwork and the physical switching tell different stories. Lockout and tagout discipline, arc flash...
A maintenance department only performs as well as the data it keeps. Moving from spreadsheets and paper cards to a computerised maintenance...
Many South African plants swing between reactive firefighting and rigid time based servicing that wastes labour and spares. This programme...
Unplanned bearing and coupling failures cost South African mines and factories production hours that are hard to recover. This hands on...
Lubrication is repeatedly cited as a leading cause of avoidable bearing and gearbox failure on African industrial sites, yet it receives...
Pumps, compressors and fans keep water treatment works, mines and factories running across the region, and their failure often stops...
Hydraulic and pneumatic systems drive presses, mining equipment and materials handling plant across the region, and faults are often...
Boiler plant failures at sugar mills, paper plants and process sites carry serious safety and production consequences, and maintenance...
Conveyor stoppages halt entire mining and bulk handling operations, so belt, idler and drive maintenance carries outsized production risk...
Coastal humidity, mining chemicals and ageing infrastructure make corrosion a persistent drain on asset life across African plants, yet...
Loose electrical connections and hidden structural defects rarely announce themselves before they cause a fire or a failure, which is why...
Import delays, currency volatility and long lead times make spares management a strategic concern for maintenance departments across...
Many African plants outsource specialist maintenance work such as crane inspection, boiler repair or electrical testing, yet contracts are...
Hospitals, data centres, malls and offices across the region depend on air conditioning, ventilation and building services that too often...
Technicians promoted into maintenance supervisory roles across African operations are usually strong artisans but rarely trained to lead...
Haul trucks, forklifts, loaders and light vehicles keep mines, farms and logistics operations moving, and their maintenance is often...
Motor control centres and variable speed drives sit at the heart of most South African production plants, yet many electrical teams only...
Poor alignment, wrong bearing fits and unbalanced rotors quietly destroy pumps, fans and motors long before their design life. This hands...
Maintenance teams are often expected to weld up worn structures, patch failed brackets and fabricate replacement parts on short notice, yet...
Gearboxes, belts, chains and couplings transmit power across almost every plant, and their failure usually stops a whole line rather than a...
Process plants depend on instruments and control loops that measure and regulate flow, level, pressure and temperature, and drifting...
With load shedding a constant feature of South African operations, standby generators and uninterruptible power supplies have moved from...
Compressed air is one of the most expensive utilities on a plant, and leaking, poorly maintained systems waste large amounts of electricity...
Cooling towers and industrial water circuits reject heat from processes across mining, power and manufacturing, yet scale, fouling and...
Maintenance managers are increasingly asked to justify every rand they spend and to prove that the department adds value rather than just...
When a critical machine fails repeatedly, replacing the broken part rarely solves the underlying problem, and the failure simply returns...
Modern African plants rely on programmable controllers and supervisory systems that few maintenance teams feel confident troubleshooting...
Replacing failed electric motors is expensive and often delayed by long import lead times across Africa. This workshop equips motor repair...
Leaking seals and repeat pump failures drain water, chemicals and money across mines, utilities and factories. This hands on programme...
Valves that stick, pass or fail to seat cause product loss, safety incidents and failed shutdowns on African process plants. This programme...
Compressed air, steam and gas leaks quietly waste energy and money on almost every African industrial site. This practical programme trains...
Used oil carries an early warning of wear and contamination that many African plants never read. This programme teaches maintenance teams...
Fired heaters and furnaces are among the highest risk and highest cost assets on refineries, smelters and process plants across Africa...
Fouled and leaking heat exchangers rob process plants of efficiency and force unplanned stops. This programme takes maintenance teams...
Unreliable switchgear and transformers threaten both production and safety on African sites already strained by unstable grid supply. This...
Battery banks quietly back up substations, control rooms and emergency systems, yet they often fail exactly when a power outage strikes...
Cold stores, abattoirs and food factories across Africa depend on large refrigeration plants, many running on ammonia with real safety...
Many repeat failures on African plants trace back to sloppy assembly rather than worn parts, with over or under tightened bolts a frequent...
Overhead cranes and hoists move critical loads in African workshops, mills and warehouses, and their failure carries serious safety and...
Process decisions and safety systems on African plants are only as trustworthy as the instruments feeding them, yet calibration is often...
Every plant has a handful of equipment items that fail again and again, quietly consuming a large share of the maintenance budget. This...
Maintenance systems on many African sites are undermined by messy asset registers, duplicated equipment and unreliable history that no one...
Maintenance teams that cannot confidently read drawings waste time on site and risk dangerous mistakes during isolation and repair. This...
With grid supply unreliable across much of Africa, diesel generator sets have become critical rather than standby, and their engines need...
Failed steam traps silently blow live steam or waterlog systems, wasting large amounts of energy on African factories, mills and hospitals...
Belt drives, chain drives and couplings connect motors to almost every machine on an African plant, yet they are often installed and...
When a line trips on an African production site, downtime costs mount by the minute while technicians hunt for the fault. This programme...
Process plants across Africa rely on kilometres of pipework carrying water, steam, chemicals and gases, yet leaks and joint failures remain...
Fixed fire protection systems only save lives and assets if they work on the day they are needed, yet they are often neglected until an...
In busy African office towers, hospitals, malls and mines, out of service lifts frustrate users and can pose real safety risks. This...
As rooftop and ground mounted solar plants spread across Africa to counter grid instability, sites increasingly need staff who can keep...
Long lead times and costly imports for obsolete or hard to source parts stall many African maintenance operations. Additive manufacturing...
A growing, unmanaged work order backlog is one of the clearest signs of a maintenance function losing control, and it is common across...
Storage tanks holding fuel, water, chemicals and process liquids are major assets on African industrial, fuel and utility sites, and their...
Water and effluent treatment plants keep African factories, mines and municipalities running and compliant, but their pumps, blowers...
Reliability is built in the day a machine is installed, yet foundations, grouting and commissioning are often rushed on African projects...
Many African maintenance teams sit on years of failure and work order history without turning it into decisions. This programme teaches...
When critical equipment fails without warning, the speed and quality of the maintenance response decides how much production is lost. This...
Low cost sensors and cloud dashboards are making continuous machine health monitoring realistic for African plants that could never justify...
Furnaces, kilns, boilers and incinerators across African cement, metals and processing industries depend on refractory linings that fail...
Maintenance work constantly involves lifting and moving heavy components, and poor rigging is a leading cause of serious injury on African...
A well equipped maintenance workshop that can machine and repair its own parts is a huge asset where imported spares are slow and costly...
Scale, corrosion and carryover from poor water treatment quietly destroy boilers and steam systems on African industrial sites, driving up...
Loose terminations and neglected distribution boards are a hidden cause of overheating, nuisance tripping and fires on African industrial...
Maintenance managers across Africa often sense their function could perform better but lack an objective way to measure it. This programme...
Vacuum systems drive critical processes in African food, packaging, pharmaceutical and processing plants, yet they are often poorly...
In many African factories the wall between operators who run machines and artisans who fix them leaves small faults to grow into major...
As wind farms expand across South Africa, Kenya and other African markets, operators need technicians who can keep turbines producing...
Battery energy storage is being deployed rapidly across African grids to firm up renewable supply and manage load shedding. Maintaining...
Crushers and grinding mills are the heartbeat of African mineral processing plants, and unplanned stoppages carry heavy tonnage losses...
Leaking seals and gaskets are among the most common and costly problems in African process plants, causing product loss, safety hazards and...
Maintenance teams across Africa often react to failures rather than anticipating them, missing chances to design out recurring problems...
African maintenance stores often carry too much of the wrong stock and too little of what really matters, while critical parts quietly...
Food and beverage plants across Africa must keep equipment running while meeting strict hygiene and food safety expectations. Maintenance...
Maintaining safe electrical installations in African plants and buildings depends on competent inspection and testing against the wiring...
With frequent and severe lightning across much of Africa, sound earthing and lightning protection is vital to protect people, equipment and...
Modern African plants run more variable speed drives, electronics and non linear loads, which distort supply and drive up energy costs and...
With rising tariffs and unreliable supply across Africa, maintenance teams are increasingly asked to cut energy and utility costs without...
As African manufacturers adopt robots and automated lines, they need technicians who can keep these systems running safely and precisely...
Weighbridges and industrial scales sit at the point where African mines, farms and factories measure value, so accuracy directly affects...
Accurate flow measurement underpins billing, process control and loss reduction across African water utilities, mines and process plants...
Gas detection and emergency shutdown systems are the last line of defence in African refineries, mines and process plants, and they must...
Commercial buildings, hospitals and data centres across Africa increasingly rely on building management systems to control heating...
Gas turbines and large turbomachinery drive power generation and heavy process duties in African plants, where a single trip can cost...
Protection relays guard African power networks and plant electrical systems, isolating faults before they cause fires, outages and...
Many African maintenance functions collect failure and cost data but struggle to turn it into better reliability. This programme introduces...
Effective water treatment protects the reliability, efficiency, safety and lifespan of industrial boilers, cooling towers and water storage...